Search This Blog

Loading...

VideoBar

This content is not yet available over encrypted connections.

Wednesday, January 12, 2011

Electrical PM Tools

This is a continuation of the series of post titled; "Electrical Preventive Maintenance Will Keep You Safe and Warm", a collection of guest post by Stuart Smith, MBA, MS.

Electrical PM Tools
By Stuart Smith

Performing electrical preventive maintenance can be done with the help of a number of technology tools. Which tool or combination of that works best for your facility depends on the type, location and accessibility of assets. The most important part about performing preventive maintenance is that is must be planned and be consistent. Regardless of the type of tool used to identify problems all electrical repair/install work should be done by a licensed electrician.

The goals of reliability, condition based, predictive and preventive maintenance are all the same which is to keep assets working in optimal condition for the longest period of time at the lowest overall cost to an organization. Some of the tools available are:

CMMS/EAM software for asset and maintenance management. These are good for scheduling all forms of preventive and predictive maintenance including work orders and inspections as well as tracking vendor documents/contracts for outsourcing of work.

PLC training: PLCs are used for the control of machinery from assembly lines to lighting fixtures. PLCs are designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact.

◦CBM and reliability based maintenance methodologies.

◦Infrared Thermography: Common predictive technology tool that is great for identifying changes in heat or moisture. As previously stated almost all devices run hot before failure. Moisture causes corrosion.

◦Vibration analysis: Most vibrations in electrical motors are unwanted and indicate a loss of energy occurring.

◦Ultrasonic analysis: Not all sounds are audible to the human ear. Ultrasound analysis can detect tightness

◦Laser alignment: Laser shaft alignment can increase the efficiency and lifecycle of motors.

◦Using the senses: Visual, smell and noise changes are important signals of impending problems and they can be used for often than any other form of problem identification.

Please Follow this blog to see the next post in this series titled "Electrical Inspection checklists and resources"

Also if you find this post useful, please share with others using the social media buttons, and your comments below are always appreciated.

About the post author Stuart Smith, MBA, MS: Stuart is an avid writer about CMMS and EAM software solutions for Mintek Mobile Data Solutions.

Saturday, January 8, 2011

Electrical Inspection Checklists and Resources

This is a continuation of the series of post titled; "Electrical Preventive Maintenance Will Keep You Safe and Warm", a collection of guest post by Stuart Smith, MBA, MS.

Electrical Inspection Checklists and Resources
By Stuart Smith

Every organization has a unique set of assets. Therefore, it is unlikely that the same electrical inspection checklist will be the same. The following links are examples of electrical preventive maintenance checklist or good resources to develop your own checklists:


NFPA. Order the complete NEC code book.

◦Comprehensive Electrical System Maintenance Checklists Sample Electrical Inspection Checklist.

Ensuring long life for electrical equipment. Solid information about Electrical equipment.

◦Standard for Infrared Inspection of Electrical Systems & Rotating Equipment Infraspection Institute Guide



Please Follow this blog to see future post."

Also if you find this post useful, please share with others using the social media buttons, and your comments below are always appreciated.

About the post author Stuart Smith, MBA, MS: Stuart is an avid writer about CMMS and EAM software solutions for Mintek Mobile Data Solutions.

Tuesday, January 4, 2011

Electrical Buzz by Don Fitchett

RE: Electrical Contractor: Keeping Electricity Where it Belongs

The author of the article below, Ed Brown, had a good idea in our discussion too. Add Electrical Predictive Maintenance (PdM) to your regular Electrical Preventative Maintenance program (PM). I say even better... PM+PdM+PLCpm

See Ed’s article at …
Electrical Contractor: Keeping Electricity Where it Belongs

Buzz by Don Fitchett from Posted from the web

Don (Follow me on Industrial Skills Training Blog and on Twitter @IndTraining .)

Sunday, January 2, 2011

How Often Should Electrical PM be done?

This is a continuation of the series of post titled; "Electrical Preventive Maintenance Will Keep You Safe and Warm", a collection of guest post by Stuart Smith, MBA, MS.

How Often Should Electrical be done?
By Stuart Smith

Electrical systems should have a thorough inspection by a licensed electrician every 3 to 5 years. Individual assets should be inspected according to manufacturer directions or based upon experience and industrial training in a particular environment. For example, some motors may need to be inspected quarterly, air handlers annually and so on. Preventive maintenance, inspections and work orders are best handled using CMMS software for the scheduling and recording of activity, results and notes.

Preventive maintenance of electrical systems goes beyond the visual or scheduled predictive maintenance work. A full electrical PM is a complete look at the electrical system including;

Sample Electrical PM Items

◦Re-torque connections
◦Checking panel boards
Inspecting PLCs for effectiveness
◦Examining work orders as well as new installs for compliance and uniformity
◦Making sure lock-out tags are in place
◦Inspection of heating and cooling units
◦Lighting
◦GFCIs
◦Shutdown mechanisms
◦NEC code compliance

Please Follow this blog to see the next post in this series titled "Electrical PM Tools"


Also if you find this post useful, please share with others using the social media buttons, and your comments below are always appreciated.

About the post author Stuart Smith, MBA, MS: Stuart is an avid writer about CMMS and EAM software solutions for Mintek Mobile Data Solutions.